One of the most critical aspects of 300ZX ownership and maintenance is routine and proper changing of your oil. The 300ZX’s VG (or RB) series engine needs regular oil changes like any other car. Fortunately, this is something you can do yourself as opposed to taking it to the shop to get done. This guide will serve as a reference for engine oil type, weight, temperature differences, and more.
Some of the links on this page may be affiliate links, meaning I receive a commission (at no extra cost to you) if you click on the link and make a purchase. I only recommend products I’ve used and trust unless stated otherwise.
It is generally recommended that for any older vehicle, you should change your oil every 3,000 miles, and that the filter should be changed every 6,000 miles. However, with more hobby-focused cars such as the 300ZX, we recommend also considering how long the oil has been in the crankcase. Oil that sits idle at the bottom of the crankcase can break down in the presence of contaminants such as dirt, gas, or really any debris that might be present in your oil, regardless of whether or not you’ve been running the engine. So, change the oil every 3,000 miles or every 6-12 months, whichever comes first. If the 300ZX is put away for the winter it is always recommended that you change the oil as part of your spring maintenance as you bring the 300ZX out of hibernation. Additionally, it is a great idea to regularly check the oil and to top off the oil if you notice the oil-line on the dipstick getting close to the ‘low’ indicator.
In general, the engine oil you should be using for your 300ZX is 10W-30, however there are some considerations you should keep in mind with respect to temperature. Below is a chart you can follow for deciding what engine oil to use in different climates:
|Temperature (Fahrenheit)||Under 10 degrees||10-32 degrees||32-90 degrees||Over 90 degrees|
|Oil Type(s) to Use||10W-30, 10W, or 5W-20||10W-30, 10W-40, or 10W||10W-30, 10W-40, or 20W||10W-30, 10W-40, 20W-40, or 30W|
We recommend Lucas Oil’s high zinc engine oil. The most important consideration to keep in mind when choosing the type of engine oil for your 300ZX is that it should be a high-zinc oil. For a high performance vehicle such as the 300ZX, it is highly recommended that you use a high-zinc oil which provides wear protection in areas of increased friction. While you may have to look a little harder to find high-zinc oil or order online, it is well worth the extra effort and is a great precaution to take in a relatively vintage engine like the VG or RB series. The Lucas Oil we recommended has more than enough zinc content to satisfy your 300ZX’s engine.
The next question we get a lot from readers is whether or not it is fine to use synthetic oil, and the answer is, of course! Synthetic oil refers to any oil which features any artificial additives. So of course, our recommendation of high-zinc oil falls under that category.
The 300ZX features a cartridge-type oil filter as opposed to a permanent housing setup for the filter. Our primary recommendation for which filter to use is a Nissan Genuine OEM oil filter, part number 15208-55Y0A. We sell this part on the ZCarGuide store.
Another important note here is that you should stay away from FRAM oil filters! FRAM filters are cheap, but naturally this means that the actual build quality is cheap. I normally try to stick to only recommending products I believe in, but I have heard too many horror stories of FRAM filters breaking up and becoming adding contaminants instead of capturing them! I have heard of more than one occasion where the paper inside of a FRAM filter came loose and caused havoc inside the engine by going straight for the camshaft. While it may be tempting due to the cheap price point, I recommend you steer clear of FRAM filters.
How much oil do you need?
For 300ZXs, the amount of oil you should refill depends on whether or not you are changing the oil filter or not, and the exact model of your vehicle.
Z31 300ZX (VG20ET, RB20DET, VG30E, VG30ET, VG30DE)
4 & 1/4 quarts with filter and without filter.
Z32 300ZX (VG30E & VG30DETT)
Non-TT: 4 & 3/8 quarts with filter, 3 & 7/8 quarts without filter.
Twin-Turbo: 4 & 5/8 quarts with filter, 4 & 1/4 quarts without filter.
Both TT and Non-TT: 3 & 5/8 quarts with filter, 3 & 1/8 quarts without filter.
Oil Change Process
Start the engine and let it idle for a few minutes to heat up the oil. This is helpful because it will allow the oil to flow more freely so you can accomplish a more “complete” oil change. Locate the oil drain plug on the bottom of the crankcase. Line up your oil catch pan and remove the plug. Be careful of hot oil and do your best to catch the nut and washer (you might actually have a rubber gasket instead of a washer) before the oil starts pouring out. If you miss it, don’t worry — it happens to the best of us! Just be careful when retrieving the nut and washer from the pan of hot oil.
To remove the old oil filter, simply unscrew it off. If you cannot quite get it by hand, you will need to use a set of oil-filter pliers. If the filter has been overtightened and cannot be unscrewed by hand or with a set of filter pliers, you can drive a long punch through it horizontally and use it as a handle to unscrew the filter.
With the filter removed, simply wait a few minutes for the oil to drain fully.
To install your new oil filter, simply screw it in place. Note that for any throw-away cartridge type filter, the gasket is built in to the filter itself. Do not over-tighten the filter: Screw it until it reaches the engine block, and then tighten a half-turn after that, and you’re done.
Next, you’re going to want to refill the exact oil capacity you need into the engine, which depends on the specific year/model/engine of the 300ZX you are working with, so refer to the list above. Fire it up and ensure there are no leaks, and you should be good to go!
Checking Oil Level
If you’d like to just check out your oil level as opposed to completely changing your oil, it’s also pretty simple:
- Park on a level surface.
- Ensure the engine has been warmed up a bit.
- Pull out the dipstick and wipe it off with a paper towel.
- Re-insert the dipstick and pull it out once it has been completely inserted.
- Check to see where the oil-level reads on the dipstick scale.